Irrigation Repair Atlanta - Leak

If you have a irrigation leak be it a leaky head, leaky valve or pipe break. Don't wait until the spring to fix it. Waiting through the winter could actually make things worse and in the end it might cost you more.

A day of atlanta irrigation repairs...

Today we are only working on atlanta irrigation repairs and we always include a visual inspection, walk-thru and adjustments at each irrigation repair call we go to.

Irrigation Repair Atlanta

Today we are taking a break from irrigation system installations and getting caught up on our irrigation repairs. We have been covered up with phone calls from south of Atlanta since Friday's storm as well as our normal repair calls. All of our qualified technicians are doing irrigation repair calls today. You have an irrigation repair problem in Atlanta? For top notch service, give us a call at 770-461-1776.

Do it yourself spring start-up

So you want to save a little money this...which we are understand things have been hard. Here are a couple of tips to help you do so. Run a short 3-4 minutes on each of your irrigation system zones. Check for heads spraying improperly there could be several reasons for this from grass, debris to broken heads or nozzles. Check all valve boxes to see if you see water in those. Watch for spots of water in between heads (along irrigation lines) or pooling at the head which could indicate a problem with the head. If you spot anything or need advice, ask us and we'll try to help you. Don't forget that if you winterized your system to turn the shut off back on to re-pressurize the system first. Walk through each zone as it runs and check it out. This will help you to avoid costly repairs later. You can learn more about our $99 spring start-up on our website.

FIX A LEAK WEEK

Don't forget it's EPA Water Sense "Fix-a-Leak" week - do your part for water conservation by fixing any nasty little leaks you may have from toliets to faucets. Of course, don't forget about your irrigation.

More about the importance of proper irrigation design

A DIY homeowner is trying to figure out why his sprinkler heads are leaking when they are at the lowest point AND he has water near his valve also at a low spot. First, his irrigation installer did him a disservice by not addressing these things in the design. I know I keep preaching about proper irrigation design and this is why. Now this guy has a $1200 water bill. I made a couple of suggestions to him. He's already replaced his valve once. I told him to try Hunter 1-20s if the grade wasn't more than 10' difference and maybe a different Hunter valve.
Also, I had to mention to him how water works in mysterious ways sometimes. His valve could be fine and maybe he has a leak flowing down to his valve. I've seen way stranger things.
So again, be sure to chose wisely, chose effectively and water efficiently. Proper design of a new irrigation system is essential.